FieldTalk Modbus Master Library for .NET
MbusTcpMasterProtocol Methods |
The MbusTcpMasterProtocol type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | adamSendReceiveAsciiCmd | Send/Receive ADAM 5000/6000 ASCII command. |
| closeProtocol | Closes an open protocol including any associated communication
resources (COM ports or sockets). (Inherited from MbusMasterFunctions.) |
| configureBigEndianInts | Configures 32-bit int data type functions to do a word swap (Inherited from MbusMasterFunctions.) |
| configureBigEndianInts(Int32) | Configures 32-bit int data type functions to do a word swap
on a per slave basis (Inherited from MbusMasterFunctions.) |
| configureCountFromOne | Configures the reference counting scheme to start with one for
all slaves. (Inherited from MbusMasterFunctions.) |
| configureCountFromOne(Int32) | Configures the reference counting scheme to start with one for
a slave. (Inherited from MbusMasterFunctions.) |
| configureCountFromZero | Configures the reference counting scheme to start with
zero for all slaves. (Inherited from MbusMasterFunctions.) |
| configureCountFromZero(Int32) | Configures the reference counting scheme to start with
zero for a slave. (Inherited from MbusMasterFunctions.) |
| configureEnron32BitMode | Configures all slaves for Daniel/ENRON 32-bit Mode. (Inherited from MbusMasterFunctions.) |
| configureEnron32BitMode(Int32) | Configures a slave for Daniel/ENRON 32-bit Mode. (Inherited from MbusMasterFunctions.) |
| configureIeeeFloats | Configures float data type functions NOT to do a word swap (Inherited from MbusMasterFunctions.) |
| configureIeeeFloats(Int32) | Configures float data type functions NOT to do a word swap
on a per slave basis (Inherited from MbusMasterFunctions.) |
| configureLittleEndianInts | Configures 32-bit int data type functions NOT to do a word swap (Inherited from MbusMasterFunctions.) |
| configureLittleEndianInts(Int32) | Configures 32-bit int data type functions NOT to do a word swap
on a per slave basis (Inherited from MbusMasterFunctions.) |
| configureStandard32BitMode | Configures all slaves for Standard 32-bit Mode. (Inherited from MbusMasterFunctions.) |
| configureStandard32BitMode(Int32) | Configures a slave for Standard 32-bit Mode. (Inherited from MbusMasterFunctions.) |
| configureSwappedFloats | Configures float data type functions to do a word swap (Inherited from MbusMasterFunctions.) |
| configureSwappedFloats(Int32) | Configures float data type functions to do a word swap
on a per slave basis (Inherited from MbusMasterFunctions.) |
| customFunction | User Defined Function Code (Inherited from MbusMasterFunctions.) |
| Dispose | Releases any associated communication resources (serial ports or sockets). (Inherited from MbusMasterFunctions.) |
| forceMultipleCoils(Int32, Int32, Boolean) | Modbus function 15 (0F hex), Force Multiple Coils. (Inherited from MbusMasterFunctions.) |
| forceMultipleCoils(Int32, Int32, Boolean, Int32) | Modbus function 15 (0F hex), Force Multiple Coils. (Inherited from MbusMasterFunctions.) |
| getPollDelay | Returns the poll delay time (Inherited from MbusMasterFunctions.) |
| getPort | Returns the TCP port number used by the protocol. (Inherited from MbusIpClientBase.) |
| getRetryCnt | Returns the automatic retry count (Inherited from MbusMasterFunctions.) |
| getSuccessCounter | Returns how often a message transfer was successful (Inherited from MbusMasterFunctions.) |
| getTimeout | Returns the current time-out setting (Inherited from MbusMasterFunctions.) |
| getTotalCounter | Returns how often a message transfer has been executed (Inherited from MbusMasterFunctions.) |
| isOpen | Returns whether the protocol is open or not. (Inherited from MbusMasterFunctions.) |
| maskWriteRegister | Modbus function 22 (16 hex), Mask Write Register. (Inherited from MbusMasterFunctions.) |
| openProtocol | Connects to a TCP slave. (Inherited from MbusIpClientBase.) |
| openProtocol(String) | Connects to a TCP slave. (Inherited from MbusIpClientBase.) |
| readCoils(Int32, Int32, Boolean) |
Modbus function 1 (01 hex),
Read Coil Status/Read Coils.
(Inherited from MbusMasterFunctions.) |
| readCoils(Int32, Int32, Boolean, Int32) |
Modbus function 1 (01 hex),
Read Coil Status/Read Coils.
(Inherited from MbusMasterFunctions.) |
 | readDeviceIdentification | Modbus function 43 (hex 2B) subfunction 14 (hex 0E), Read Device Identification (Inherited from MbusMasterFunctions.) |
| readExceptionStatus | Modbus function 7 (07 hex), Read Exception Status. (Inherited from MbusMasterFunctions.) |
| readFileRecord(Int32, MbusMasterFunctionsFileSubRequest) |
Modbus function 20, Read File Record.
(Inherited from MbusMasterFunctions.) |
| readFileRecord(Int32, Int32, Int32, Int32, Int16) |
Modbus function 20, Read File Record.
(Inherited from MbusMasterFunctions.) |
| readInputDiscretes(Int32, Int32, Boolean) |
Modbus function 2 (02 hex),
Read Inputs Status/Read Input Discretes.
(Inherited from MbusMasterFunctions.) |
| readInputDiscretes(Int32, Int32, Boolean, Int32) |
Modbus function 2 (02 hex),
Read Inputs Status/Read Input Discretes.
(Inherited from MbusMasterFunctions.) |
| readInputMod10000(Int32, Int32, Int32) | Modbus function 4 (04 hex) for 32-bit modulo-10000 long int data types,
Read Input Registers as modulo-10000 long int data. (Inherited from MbusMasterFunctions.) |
| readInputMod10000(Int32, Int32, Int32, Int32) | Modbus function 4 (04 hex) for 32-bit modulo-10000 long int data types,
Read Input Registers as modulo-10000 long int data. (Inherited from MbusMasterFunctions.) |
| readInputRegisters(Int32, Int32, Array) |
Modbus function 4 (04 hex),
Read Input Registers (16-bit, 32-bit, 64-bit and floating point single and double).
(Inherited from MbusMasterFunctions.) |
| readInputRegisters(Int32, Int32, Array, Int32) |
Modbus function 4 (04 hex),
Read Input Registers (16-bit, 32-bit, 64-bit and floating point single and double).
(Inherited from MbusMasterFunctions.) |
| readMultipleMod10000(Int32, Int32, Int32) |
Modbus function 3 (03 hex) for 32-bit modulo-10000 long int data types,
Read Holding Registers/Read Multiple Registers as modulo-10000 long int
data.
(Inherited from MbusMasterFunctions.) |
| readMultipleMod10000(Int32, Int32, Int32, Int32) |
Modbus function 3 (03 hex) for 32-bit modulo-10000 long int data types,
Read Holding Registers/Read Multiple Registers as modulo-10000 long int
data.
(Inherited from MbusMasterFunctions.) |
| readMultipleRegisters(Int32, Int32, Array) |
Modbus function 3 (03 hex),
Read Holding Registers (16-bit, 32-bit, 64-bit and floating point single and double).
(Inherited from MbusMasterFunctions.) |
| readMultipleRegisters(Int32, Int32, Array, Int32) |
Modbus function 3 (03 hex),
Read Holding Registers (16-bit, 32-bit, 64-bit and floating point single and double).
(Inherited from MbusMasterFunctions.) |
| readWriteRegisters(Int32, Int32, Int16, Int32, Int16) | Modbus function 23 (17 hex), Read/Write Registers. (Inherited from MbusMasterFunctions.) |
| readWriteRegisters(Int32, Int32, Int16, Int32, Int32, Int16, Int32) | Modbus function 23 (17 hex), Read/Write Registers. (Inherited from MbusMasterFunctions.) |
| resetSuccessCounter | Resets successful message transfer counter (Inherited from MbusMasterFunctions.) |
| resetTotalCounter | Resets total message transfer counter (Inherited from MbusMasterFunctions.) |
| restartCommunicationsOption | Modbus function code 8, sub-function 01, Restart Communications Option (Inherited from MbusMasterFunctions.) |
| returnQueryData | Modbus function code 8, sub-function 00, Return Query Data. (Inherited from MbusMasterFunctions.) |
| setClosingTimeout | Configures socket close time-out (Inherited from MbusIpClientBase.) |
| setPollDelay | Poll delay property (Inherited from MbusMasterFunctions.) |
| setPort | Sets the TCP port number of the Modbus slave device. (Overrides MbusIpClientBasesetPort(Int16).) |
| setRetryCnt | Configures the automatic retry setting (Inherited from MbusMasterFunctions.) |
| setTimeout | Configures time-out (Inherited from MbusMasterFunctions.) |
| writeCoil | Modbus function 5 (05 hex), Force Single Coil/Write Coil. (Inherited from MbusMasterFunctions.) |
| writeFileRecord(Int32, MbusMasterFunctionsFileSubRequest) |
Modbus function 21, Write File Record.
(Inherited from MbusMasterFunctions.) |
| writeFileRecord(Int32, Int32, Int32, Int32, Int16) |
Modbus function 21, Write File Record.
(Inherited from MbusMasterFunctions.) |
| writeMultipleMod10000(Int32, Int32, Int32) |
Modbus function 16 (10 hex) for 32-bit modulo-10000 long int data types,
Preset Multiple Registers/Write Multiple Registers with
modulo-10000 long int data.
(Inherited from MbusMasterFunctions.) |
| writeMultipleMod10000(Int32, Int32, Int32, Int32) |
Modbus function 16 (10 hex) for 32-bit modulo-10000 long int data types,
Preset Multiple Registers/Write Multiple Registers with
modulo-10000 long int data.
(Inherited from MbusMasterFunctions.) |
| writeMultipleRegisters(Int32, Int32, Array) |
Modbus function 16 (10 hex),
Write Multiple Registers (16-bit, 32-bit, 64-bit and floating point single and double).
(Inherited from MbusMasterFunctions.) |
| writeMultipleRegisters(Int32, Int32, Array, Int32) |
Modbus function 16 (10 hex),
Write Multiple Registers (16-bit, 32-bit, 64-bit and floating point single and double).
(Inherited from MbusMasterFunctions.) |
| writeSingleRegister(Int32, Int32, Int16) |
Modbus function 6 (06 hex),
Preset Single Register/Write Single Register.
(Inherited from MbusMasterFunctions.) |
| writeSingleRegister(Int32, Int32, UInt16) |
Modbus function 6 (06 hex),
Preset Single Register/Write Single Register.
(Inherited from MbusMasterFunctions.) |
See Also